Home
Information
Where to buy
Service
Contact us
Language
Ua
Ru
En

PARKETT PRESTIGE XT

Art. 788572
Washing vacuum cleaner with innovative Aqua-Filterbox water filtration system for professional parquet care and efficient cleaning
Vacuum cleaner for parquet
and laminate flooring, original German production
Professional and stylish -
the perfect choice for parquet care
Fixing the tube with nozzle
to the body when parking horizontally
Easy installation
of AquaBOX water filtration system
Easy filling of AquaBOX
with water through a special opening
Easy cleaning of AquaBOX after use
Long mains cord, capacious clean water tank
Convenient placement
of accessories on the body during cleaning
EasyDrive front rollers for high manoeuvrability
AquaStealth nozzle for safe
and high-quality cleaning of parquet floors
Premium set with nozzles for all surfaces
Corded hose, steel
telescopic tube and spray system
Washing vacuum cleaner for parquet and laminate flooring THOMAS Parkett Prestige XT, original German assembly
It's easy to quickly pick up spills in your apartment with THOMAS vacuum cleaner for wet cleaning or dry cleaning and water suction. The vacuum cleaner collects between 2.6 and 20 liters of water in one go (depending on the model). Practical and handy in domestic and emergency situations.
Clean your carpet quickly and easily with a powerful vacuum cleaner. THOMAS vacuum cleaners with the modern AquaBOX, Aquafilter or DryBOX filtration systems do not lose suction power throughout the entire cleaning process. Cleaning your carpet with THOMAS is quick and efficient.
It is possible to get 100% clean and fresh air when cleaning if you have a vacuum cleaner with a high quality aquafilter. For example, THOMAS vacuum cleaners with AquaBOX or Aquafilter filtration systems with Wet-Jet dust suppression technology capture 99.99% of dust and 100% of pollen. After cleaning, the air is pure and fresh!
In order to wash parquet safely, use a minimum of liquid. Choose THOMAS AquaStealth nozzle, which is specially designed for wet cleaning of delicate hard surfaces. It will gently clean the parquet without scratches and direct contact with water, as well as dry the surface.
You can properly clean the wooden floor with brushes made of natural material that will not damage the floor. THOMAS vacuum cleaners for parquet and laminate are equipped with a brush head made of natural horsehair. It carefully picks up debris from the wooden floor without scratching the surface.
Cleaning upholstered furniture with THOMAS washing vacuum cleaner is easy. Prepare the vacuum cleaner for wet cleaning, choose a narrow cleaning nozzle. During cleaning, do not oversaturate the fabric with moisture! Then dry the upholstery by working without detergent solution. For best results, use branded cleaning concentrate.
A multifunctional vacuum cleaner will help you quickly clean up the house. Dry and wet cleaning, air purification, removing stains from carpets and furniture - all these tasks can be easily solved by THOMAS washing vacuum cleaner with AquaBOX or Aquafilter. All functions in one device - efficient and practical!
Water filter - 100% pure and fresh air. Feel the difference!

Thomas Parkett Prestige XT - the best solution for cleaning parquet and laminate flooring!

AquaBOX water filtration system
  • The unique AquaBOX water filter with innovative Wet-Jet dust suppression technology captures 99.99% of the finest dust and 100% of pollen.
  • The air feels clean and fresh after cleaning!
  • Additionally, a washable HEPA 13, filter is fitted.
Alternative filtration systems

If you wish, you can purchase and install:

  • Cyclone filter DryBОХ for dry cleaning with fractional separation of debris and dust.
  • Disposable НЕРА bags with a high degree of dust retention.
Dry cleaning
  • Delicate dry cleaning of parquet and laminate.
  • Deep cleaning of carpets from debris and dust.
  • Thorough cleaning of smooth floor coverings.
  • Automatic backlight for dark places.
  • Cleaning upholstered furniture, including crevices between cushions.
Wet cleaning
  • Wet cleaning (washing) of carpets and rugs.
  • Wet cleaning of hard floor coverings.
  • Deep washing (washing) of upholstery.
  • Minimal residual moisture after cleaning.
Washing Parquet and Laminate
  • The unique Aqua Stealth nozzle gently vacuums, washes and dries parquet or laminate just in two moves.
  • After cleaning, the floor is clean and dry!
  • Also with this nozzle you can easily wash tile, stone and any other floor coverings.
Removing a Large Amount of Water
  • Quick suction of a large amount of water in a shot period of time helps to avoid subsequent expenses for the restoration of premises and furniture.

AWARDS
CERTIFICATES
TECHNOLOGIES

MADE IN GERMANY mark. Incomplete circle in black, yellow and red colours plus text
True German Quality
'Approved for allergy sufferers’ seal from the British Allergy Foundation, green leaf in a white and yellow circle
Approved for allergy sufferers
THOMAS AquaBOX water filter symbol, aquabox container in a blue circle
Water filter AquaBOX
THOMAS WET-JET dust suppression technology symbol, crossed water jets (water wall) in a red circle
Water-based Air Purification System

USER-FRIENDLY DESIGN

TouchTronic electronic power control, 4 power levels and ECO mode for air purifier mode
4-stage electronic power regulator and last mode memory.
ECO mode for use as an air purifier.
Flap on the hose for mechanical power control, suitable for cleaning fine textile surfaces
The hoover's remote control and power control on the hose handle make it even more convenient to select the right power for different surfaces.
Horizontal and vertical parking allows you to save space and store the vacuum cleaner even in a small cupboard
Horizontal and vertical parking for compact storage.
EasyDrive front rollers rotate 360 degrees for easy movement of the vacuum cleaner
High maneuverability with EasyDrive casters. No need to carry.
Long power cord provides comfortable cleaning from a single socket and reels off automatically
Automatic cable rewind. Cleaning radius from one socket - 11 m.
THOMAS Parkett Prestige XT, convenient slots on the vacuum cleaner body for upholstery and crevice nozzles
Storage of accessories on the case during cleaning.
Assistant for manual with video
Assistant for manual with video

Preparing the water filter THOMAS AquaBOX:

  • It is necessary to pour 1 liter of clean water into a container;
  • Insert the AquaBOX into the vacuum cleaner housing;
  • Make sure that the injector is working and that water is spraying through the cover opening

The anti-spill insert must never be installed when preparing the AquaBOX for dry cleaning.

copy link to clipboard

You can rinse the cleaning solution supply system after wet cleaning using the spray mode.

  • Fill the solution tank with clean water;
  • Switch on the pump (Pump button) and press the handle of the shut-off valve on the hose;
  • Place the washing nozzle in a suitable container and allow the pump to pump water from the clean water tank into the container.
copy link to clipboard

In order to connect the washing nozzle and assemble the water supply system, you must:

  1. Mount the washing nozzle on the telescopic tube, using clips to secure the solution supply hose to the tube;
  2. Connect a shut-off valve to the air hose;
  3. Fasten the cleaning solution supply hose from the shut-off valve to the vacuum cleaner to the air hose with clips. The gaps between the clips should be approximately equal;
  4. Insert the thin end of the air hose into the telescopic tube, making sure the connection is secure;
  5. Connect the tube of the washing nozzle to the shut-off valve, turning until it locks into place;
  6. Insert the air hose of the vacuum cleaner and turn until it locks into place;
  7. Insert and fix the tip the tip of the detergent supply hose in the connector on the cleaner body.
copy link to clipboard

To prepare a vacuum cleaner with AquaBOX for use in wet cleaning mode, you must:

  1. Pour water or water with THOMAS cleaning concentrate into the detergent tank.;
  2. Place an splash guarding insert in the AquaBOX;
  3. Attach the cleaning solution supply tube on the air hose to the connection on the vacuum cleaner body;
  4. Connect the detergent supply tube of the washing nozzle to the shut-off valve;
  5. Turn on the vacuum cleaner with the Power button and the pump with the Pump button;
  6. Press the shut-off valve lever.

You are ready for wet cleaning!

copy link to clipboard

The process of washing hard surfaces with a floor/carpet cleaning nozzle has its own characteristics.

During wet cleaning, water is supplied to the washing nozzle, and at the same time the brush of the hard surfaces adapter along the floor.

This may leave residual moisture on the floor covering.

In order to dry the surface, change the angle of the washing nozzle, press the rubber scraper on the adapter to the surface with a little force and collect the water by moving it towards you.

A rubber scraper with simultaneous supply of cleaning solution can also remove specific contaminants.

copy link to clipboard

In order to wash upholstered furniture using a narrow nozzle for wet cleaning.

  • Attach it to the air hose;
  • Then attach the detergent supply tube to the shut-off valve on the air hose and turn until it is fully secured;
  • Switch on the pump using the button on the vacuum cleaner body, then press the shut-off valve lever to supply water.

Direct wet cleaning occurs when the washing nozzle moves towards itself. Work strip by strip, lifting and repositioning the nozzle.

To reduce residual moisture, you can stop the water supply and continue moving the nozzle towards you, removing excess moisture.

copy link to clipboard

Maintaining AquaBOX after finishing wet cleaning mode is easy.

  • Pour out dirty water, wash all parts of the AquaBOX and be sure to dry them.

Only after this clean and dry AquaBOX can be assembled and stored.

copy link to clipboard

To pull out the power cord before starting work, pull the plug and then pull the cord.

Be sure to look at the indicator (red electrical tape on the cord). As soon as it is visible, stop pulling the cable.

To rewind the cable, lightly pull it then release it (the vacuum cleaner uses inertial rewinding of the power cable).

copy link to clipboard

The aqua spray injector is fixed in the AquaBOX lid with rubber seals.

To remove the injector, simply pull it towards you, slightly rotating it in different directions.

Washing the aqua sprayer is a very important procedure, because it is responsible for the correct operation of the aquafilter system.

copy link to clipboard

To install the hard surface adapter:

  • First slide it onto the fixed clip on one side of the washing nozzle.;
  • Then secure the adapter to the other side of the nozzle using the red locking button;
  • Then fix the adapter in the working position with the central lock..
copy link to clipboard

To detach the solution supply hose from the vacuum cleaner, simply press the locking button and the tube will pop out.

Never pull or force the solution supply tube towards you!

copy link to clipboard

For the ideal gentle and thorough dry cleaning of parquet and laminate floors, there are special nozzles with natural bristles.

These nozzles leave no scratches or other damage on delicate floor coverings.

The nozzle with natural horsehair and felt inserts also rubs and polishes the floor, giving parquet or laminate an additional light shine.

copy link to clipboard

It is recommended to wash and dry the water-repellent filters in the AquaBOX lid after each cleaning.

If the suction power has decreased, it's time to wash the HEPA filter.

  1. First, tap the dry filter on a hard surface;
  2. Then gently rinse the entire surface of the filter under running water WITHOUT using brushes or detergents.
  3. Even if the filter has turned grey, it can still trap dust perfectly. After washing, dry the filter at room temperature.

The motor protection filter with activated carbon cannot be washed, it can only be tapped out lightly.

The micro exhaust filter in the lower rear part of the vacuum cleaner is not serviceable and must be replaced.

For maximum efficiency of the entire filtration system, the manufacturer recommends changing all the filters together (the whole set) вon average once every 12 months, but this depends on how the cleaner is used (frequency of cleaning, contamination level in the room, etc.).

copy link to clipboard

The process of washing a carpet occurs when water is supplied to the washing nozzle while the nozzle is moved along the surface.

The washing solution, under pressure, penetrates deep into the pile of the carpet, washing away all the dirt from the depths.

Wet and more elastic fibres of the carpet are straightened by the suction force and the surface becomes evenly fluffy. At the same time, residual moisture will be present on the surface and in the depths of the carpet.

To remove the water, change the angle of the nozzle, press it down on the carpet with a little force and collect the water in a ""pulling"" motion. For maximum effect, do this several times until no more water drops appear on the nozzle.

The transparent plastic of the nozzle makes it possible to control how the water is absorbed.

The amount of water sprayed onto the carpet by a vacuum cleaner and collected in the AquaBOX may vary by 2 or more times.

This is normal - some moisture remains in the carpet and dries out in a few hours.

copy link to clipboard

To wash parquet/laminate flooring with the AquaStealth nozzle, press the detergent solution supply lever and at the same time move the nozzle away from you over the surface.

This will wet the surface and dissolve the dirt. Release the lever for cleaning solution supply and move it towards you - the nozzle will collect the liquid with dissolved dirt.

The residual moisture of the floor covering after wet cleaning is less than 1%.

The AquaStealth nozzle not only cleans, but also dries the floor.

When wet cleaning with the AquaStealth nozzle, the vacuum cleaner constantly supplies clean water and sucks dirty water into a separate tank.

After washing, the floor is perfectly clean, without streaks (unlike the floor after washing with a rag or mop). A napkin attached to the nozzle gently rubs the floor, giving it a slight shine and a well-groomed appearance.

copy link to clipboard

In order to quickly vacuum up spilled liquid with an AquaBOX vacuum cleaner, be sure to install a splash quarding insert in the AquaBOX!

  • Connect the air hose and telescopic tube to the vacuum cleaner;
  • Attach a carpet/floor switchable nozzle or a wide cleaning nozzle to the tube (with a hard surface adapter if you need to collect water from a smooth floor);
  • Turn on the vacuum cleaner and start collecting water by moving the nozzle towards you;
  • The vacuum cleaner can collect up to 2.6 liters of liquid at a time;
  • When the tank is full, the vacuum cleaner will automatically turn off.

If you need to continue working, pour out the collected water and turn the vacuum cleaner on again.

copy link to clipboard

Special holes in the body of the vacuum cleaner make it easy to keep extra nozzles handy while cleaning.

For example, you can place a crevice nozzle, a brush or an upholstery nozzle in these holes while cleaning.

This way you always have small accessories at hand.

Some models of THOMAS vacuum cleaners are also equipped with a Vario Clip nozzle holder, which is attached to the tube or hose handle.

copy link to clipboard

The CleanLight LED floor/carpet nozzle helps you avoid missing dirt in poorly lit areas of the floor.

It automatically illuminates behind cupboards, under sofas and in other dark areas.

Thanks to LED lighting, you can not only carefully collect all the rubbish, but also find lost small items.

copy link to clipboard
"

It is strictly prohibited to pour hot water into the clean water tank!

This may damage the cleaning solution supply system.

If necessary, you can fill the tank with slightly warm water, not exceeding 25-30 degrees.

"
copy link to clipboard

It is not recommended to add aromatic (essential) oils to the water during dry or wet cleaning!

Fats promote the adhesion of debris and dust particles to the parts and filters of the vacuum cleaner. This makes it difficult to maintain the vacuum cleaner after cleaning and shortens the service life of replaceable filters.

copy link to clipboard

There are different ways to clean floor surfaces.

  • Soft floors can be cleaned with wet cleaning nozzles without an adapter. Otherwise, the residual moisture in soft coverings will be too high.
  • In order to wash hard floor coverings, a washing nozzle with an adapter is used (it’s called an adapter for washing hard surfaces).
  • A special AquaStealth washing nozzle is designed for washing parquet floors coated with varnish or mastic and other coverings that can't resist direct contact with water. When using this nozzle, water enters the floor surface through a special microfiber (cloth), and the cloth carefully cleans the surface without excess moisture.
copy link to clipboard

The main difference between a parquet nozzle and a regular one is that through it water is not supplied directly to the floor surface, but to a special cloth, which then washes the floor.

A regular wet floor nozzle sprays water under pressure directly onto the floor. This method is great for tiles, linoleum, stone and other coverings that are not afraid of water.

Parquet nozzles, such as AquaStealth or the nozzle with cloth adapter, allow you to clean delicate floors just as thoroughly, but with a minimum amount of moisture. This ensures that the floor will not swell or bloat after wet cleaning.

copy link to clipboard