Home
Information
Where to buy
Service
Contact us
Language
Ua
Ru
En

TWIN T1 AQUAFILTER

Art. 788550
Original German-made wet and dry vacuum cleaner with open water filtration system. Wet cleaning of various surfaces. Indoor air purification. Large removable tank for cleaning solution. Prompt liquid collection.
THOMAS vacuum cleaner with AquaBOX or Aquafilter water filtration system will help purify the air at home. During cleaning with such a vacuum cleaner, the air is 99.99% cleaned of dust and 100% of pollen. To operate the vacuum cleaner in the air purifier mode, turn it on for 5-10 minutes without hose connection.
Cleaning with pleasure is possible if you have a reliable assistant. THOMAS vacuum cleaners are true German quality. Vacuums for wet and dry cleaning, for allergy sufferers and pet owners, for parquet, professional and cordless - choose your model for perfect cleaning.
Clean your carpet quickly and easily with a powerful vacuum cleaner. THOMAS vacuum cleaners with the modern AquaBOX, Aquafilter or DryBOX filtration systems do not lose suction power throughout the entire cleaning process. Cleaning your carpet with THOMAS is quick and efficient.
You can quickly collect water and wet dirt with a wet vacuum cleaner or a vacuum cleaner with water suction function. THOMAS vacuum cleaners can collect between 2.6 and 20 liters of water in one go (depending on the model). Convenient and fast in domestic and emergency situations.
It is better to wash hard floors only with clean water, but when using a mop or rag, this is almost impossible. And the THOMAS washing vacuum cleaner constantly supplies clean water for washing, and collects dirty water in a separate tank. This allows you to achieve perfect cleanliness of the hard floor without streaks.
Fresh air, like after the rain.
Assistant for manual with video
Assistant for manual with video

You can rinse the cleaning solution supply system after wet cleaning using the spray mode.

  • Fill the solution tank with clean water;
  • Switch on the pump (Pump button) and press the handle of the shut-off valve on the hose;
  • Place the washing nozzle in a suitable container and allow the pump to pump water from the clean water tank into the container.
copy link to clipboard

In order to connect the washing nozzle and assemble the water supply system, you must:

  1. Mount the washing nozzle on the telescopic tube, using clips to secure the solution supply hose to the tube;
  2. Connect a shut-off valve to the air hose;
  3. Fasten the cleaning solution supply hose from the shut-off valve to the vacuum cleaner to the air hose with clips. The gaps between the clips should be approximately equal;
  4. Insert the thin end of the air hose into the telescopic tube, making sure the connection is secure;
  5. Connect the tube of the washing nozzle to the shut-off valve, turning until it locks into place;
  6. Insert the air hose of the vacuum cleaner and turn until it locks into place;
  7. Insert and fix the tip the tip of the detergent supply hose in the connector on the cleaner body.
copy link to clipboard

The process of washing a carpet occurs when water is supplied to the washing nozzle while the nozzle is moved along the surface.

The washing solution, under pressure, penetrates deep into the pile of the carpet, washing away all the dirt from the depths.

Wet and more elastic fibres of the carpet are straightened by the suction force and the surface becomes evenly fluffy. At the same time, residual moisture will be present on the surface and in the depths of the carpet.

To remove the water, change the angle of the nozzle, press it down on the carpet with a little force and collect the water in a ""pulling"" motion. For maximum effect, do this several times until no more water drops appear on the nozzle.

The transparent plastic of the nozzle makes it possible to control how the water is absorbed.

The amount of water sprayed onto the carpet by a vacuum cleaner and collected in the AquaBOX may vary by 2 or more times.

This is normal - some moisture remains in the carpet and dries out in a few hours.

copy link to clipboard

Alternative filtration systems in washing vacuum cleaners with AQUAFILTER are:

  • disposable HEPA bags (product No. 787274);
  • XXL disposable HEPA bags with a volume of 6 liters (product Nos. 195292 or 195316);
  • hygiene box with HEPA bags HYGIENE-BAG (product No. 787229).

An alternative filtration system can be installed in a vacuum cleaner instead of AQUAFILTER and used for quick cleaning without preparation, as well as for collecting specific debris that can clog the water filter (for example, building dust).

copy link to clipboard

Using a vacuum cleaner with AQUAFILTER in air purifying mode is very simple.

  • Fill the AQUAFILTER with 1 liter of normal water;
  • Turn on the vacuum cleaner without connecting the hose;
  • Leave the vacuum cleaner running in the room for 10-15 minutes, closing all windows and doors;
  • A vacuum cleaner will rinse the air in the room and remove the smallest particles of harmful airborne dust.

After such cleaning, the air in the room will be clean, slightly humidified and pleasant.

copy link to clipboard

Rubber seals are fitted around the perimeter of the lid and body to ensure that the vacuum cleaner is leak-proof.

To close the lid, do not exert too much effort; do not slam it!

It is enough to press lightly with your fingers on both sides of the latch.

copy link to clipboard

You can change the motor protection filter in a vacuum cleaner with AQUAFILTER by removing the plastic fixing grid.

Once the motor protection filter has been replaced, the plastic protective grid is put in place and fixed.

copy link to clipboard

You can change the porous filter in a vacuum cleaner with AQUAFILTER by removing the porous filter frame.

After replacing the porous filter, the frame is put in place.

copy link to clipboard
"

It is strictly prohibited to pour hot water into the clean water tank!

This may damage the cleaning solution supply system.

If necessary, you can fill the tank with slightly warm water, not exceeding 25-30 degrees.

"
copy link to clipboard

It is not recommended to add aromatic (essential) oils to the water during dry or wet cleaning!

Fats promote the adhesion of debris and dust particles to the parts and filters of the vacuum cleaner. This makes it difficult to maintain the vacuum cleaner after cleaning and shortens the service life of replaceable filters.

copy link to clipboard

To prepare a vacuum cleaner with AQUAFILTER for use in wet cleaning mode, you must:

  1. Pour water or water with THOMAS cleaning concentrate into the detergent tank;
  2. Remove the diffuser from the aquafilter bucket and put in its place the splash guarding insert (consists of two parts);
  3. ALWAYS remove the HEPA filter from the vacuum cleaner! If this is not done, the filter may be irreparably damaged;
  4. Attach the cleaning solution supply tube on the air hose to the connector on the vacuum cleaner body;
  5. Connect the detergent supply tube of the washing nozzle to the shut-off valve;
  6. Turn on the vacuum cleaner with the Power button and turn on the pump with the Pump button;
  7. Press the shut-off valve lever. You can start wet cleaning!
copy link to clipboard

If wet cleaning is carried out correctly, residual moisture is minimal. You can walk on the floor or carpet and sit on the sofa immediately after cleaning.

In order to avoid excessive wetting of the surface, make several strokes with the nozzle with spraying water or cleaning solution, and then several strokes without spraying, just collecting water and drying the surface.

copy link to clipboard