Home
Information
Where to buy
Service
Contact us
Language
Ua
Ru
En

VESTFALIA XT

Art. 788561
Washing vacuum cleaner with Aqua-Filterbox water filter, floor and furniture nozzles and turbo brush for fast pet hair collection
German washing vacuum cleaner
with AquaBOX and turbo brush
Attractive design and compact size
Vertical parking
for convenient storage
EasyDrive rollers for manoeuvrability
Long power cord
and removable cleaning solution tank
Convenient placement
of nozzles on the body during cleaning
AquaBOX and HEPA filter
for perfect air purification
Easy filling of AquaBOX
with water through a special opening
Easy cleaning of AquaBOX after use
Turbo brush and complete
set of accessories for dry and wet cleaning
Hose, telescopic tube,
spray system with fixings
THOMAS Vestfalia XT washing vacuum cleaner with AquaBOX and complete set of accessories. Original German assembly
THOMAS vacuum cleaner can help you remove stains from upholstered furniture. Prepare the vacuum cleaner for wet cleaning and use the narrow cleaning nozzle. Add ProTex or ProTex V cleaning concentrate to the water. Do not over saturate the fabric with moisture! Finally, vacuum without the detergent solution supply while drying the upholstery.
THOMAS vacuum cleaner with liquid collection function can quickly collect water from the floor. It can suck up between 2.6 and 20 liters of water in one go (depending on the model). This is a useful feature for household and emergency situations.
A vacuum cleaner can help you wash your carpet at home. The THOMAS vacuum cleaner rinses carpets down to the base of the pile by pumping pressurized water through a wide cleaning nozzle with a sharp edge. For best results, use a branded cleaning concentrate. Vacuum without water to dry the carpet.
A vacuum cleaner with a high-quality aqua filter will help to make the air at home clean and fresh. THOMAS vacuum cleaners with AquaBOX or Aquafilter water filtration systems retain 100% pollen and 99.99% dust. The air in the house becomes clean and pleasant to breathe after ordinary dry cleaning.
You can quickly clean carpet from pet hair and hair with a powerful vacuum cleaner and a special nozzle, for example, a turbo brush. THOMAS vacuum cleaners for pet owners do not lose suction power throughout the entire cleaning thanks to modern filtration systems: AquaBOX, DryBOX, Aquafilter.
To get rid of allergens, use a vacuum cleaner with a water filter. THOMAS vacuum cleaners with AquaBOX or Aquafilter humidify the air and purify it from allergens, retaining 99.99% of dust and 100% of pollen.
A multifunctional vacuum cleaner will help you quickly clean up the house. Dry and wet cleaning, air purification, removing stains from carpets and furniture - all these tasks can be easily solved by THOMAS washing vacuum cleaner with AquaBOX or Aquafilter. All functions in one device - efficient and practical!
Water filter - 100% pure and fresh air. Feel the difference!

THOMAS Vestfalia XT - the best solution for families!

AquaBOX water filtration system
  • The unique AquaBOX water filter with innovative Wet-Jet dust suppression technology captures 99.99% of the finest dust and 100% of pollen.
  • The air feels clean and fresh after cleaning!
  • Additionally, a washable HEPA 13, filter is fitted.
Alternative filtration systems

If you wish, you can purchase and install:

  • Cyclone filter DryBОХ for dry cleaning with fractional separation of debris and dust.
  • Disposable НЕРА bags with a high degree of dust retention.
Dry cleaning
  • Deep cleaning of carpets from debris and dust.
  • Thorough cleaning of carpets from pet hair, threads and hair.
  • Cleaning smooth floor coverings.
  • Cleaning upholstered furniture, including crevices between cushions.
Wet cleaning
  • Wet cleaning (washing) of carpets and rugs.
  • Wet cleaning of hard floor coverings.
  • Deep washing (washing) of upholstery.
  • Minimal residual moisture after cleaning.
Removing a Large Amount of Water
  • Quick suction of a large amount of water in a shot period of time helps to avoid subsequent expenses for the restoration of premises and furniture.

AWARDS
CERTIFICATES
TECHNOLOGIES

MADE IN GERMANY mark. Incomplete circle in black, yellow and red colours plus text
True German Quality
'Approved for allergy sufferers’ seal from the British Allergy Foundation, green leaf in a white and yellow circle
Approved for allergy sufferers
THOMAS AquaBOX water filter symbol, aquabox container in a blue circle
Water filter AquaBOX
THOMAS WET-JET dust suppression technology symbol, crossed water jets (water wall) in a red circle
Water-based Air Purification System

USER-FRIENDLY DESIGN

TouchTronic electronic power control, 4 power levels and ECO mode for air purifier mode
4-stage electronic power control and memory of the last mode.
ECO mode for use as an air purifier.
Grey hose handle with a flap for mechanical suction power adjustment
Mechanical power control on the hose handle for comfortable cleaning of fine textile surfaces.
Horizontal and vertical parking allows you to save space and store the vacuum cleaner even in a small cupboard
Horizontal and vertical parking for compact storage.
THOMAS wet vacuum cleaner, front rollers rotate 360 degrees for easy movement
High maneuverability with EasyDrive casters. No need to carry.
Long power cord provides a large operation range for easy cleaning and is automatically reeled in
Automatic cable reeling. The cleaning radius from one socket is 11 m.
Convenient slots on the vacuum cleaner body for upholstery and crevice nozzles
Storage of accessories on the case during cleaning.
Articles and review materials
One vacuum cleaner for all your cleaning needs
Assistant for manual with video
Assistant for manual with video

Preparing the water filter THOMAS AquaBOX:

  • It is necessary to pour 1 liter of clean water into a container;
  • Insert the AquaBOX into the vacuum cleaner housing;
  • Make sure that the injector is working and that water is spraying through the cover opening

The anti-spill insert must never be installed when preparing the AquaBOX for dry cleaning.

copy link to clipboard

You can rinse the cleaning solution supply system after wet cleaning using the spray mode.

  • Fill the solution tank with clean water;
  • Switch on the pump (Pump button) and press the handle of the shut-off valve on the hose;
  • Place the washing nozzle in a suitable container and allow the pump to pump water from the clean water tank into the container.
copy link to clipboard

In order to connect the washing nozzle and assemble the water supply system, you must:

  1. Mount the washing nozzle on the telescopic tube, using clips to secure the solution supply hose to the tube;
  2. Connect a shut-off valve to the air hose;
  3. Fasten the cleaning solution supply hose from the shut-off valve to the vacuum cleaner to the air hose with clips. The gaps between the clips should be approximately equal;
  4. Insert the thin end of the air hose into the telescopic tube, making sure the connection is secure;
  5. Connect the tube of the washing nozzle to the shut-off valve, turning until it locks into place;
  6. Insert the air hose of the vacuum cleaner and turn until it locks into place;
  7. Insert and fix the tip the tip of the detergent supply hose in the connector on the cleaner body.
copy link to clipboard

To prepare a vacuum cleaner with AquaBOX for use in wet cleaning mode, you must:

  1. Pour water or water with THOMAS cleaning concentrate into the detergent tank.;
  2. Place an splash guarding insert in the AquaBOX;
  3. Attach the cleaning solution supply tube on the air hose to the connection on the vacuum cleaner body;
  4. Connect the detergent supply tube of the washing nozzle to the shut-off valve;
  5. Turn on the vacuum cleaner with the Power button and the pump with the Pump button;
  6. Press the shut-off valve lever.

You are ready for wet cleaning!

copy link to clipboard

The process of washing hard surfaces with a floor/carpet cleaning nozzle has its own characteristics.

During wet cleaning, water is supplied to the washing nozzle, and at the same time the brush of the hard surfaces adapter along the floor.

This may leave residual moisture on the floor covering.

In order to dry the surface, change the angle of the washing nozzle, press the rubber scraper on the adapter to the surface with a little force and collect the water by moving it towards you.

A rubber scraper with simultaneous supply of cleaning solution can also remove specific contaminants.

copy link to clipboard

In order to wash upholstered furniture using a narrow nozzle for wet cleaning.

  • Attach it to the air hose;
  • Then attach the detergent supply tube to the shut-off valve on the air hose and turn until it is fully secured;
  • Switch on the pump using the button on the vacuum cleaner body, then press the shut-off valve lever to supply water.

Direct wet cleaning occurs when the washing nozzle moves towards itself. Work strip by strip, lifting and repositioning the nozzle.

To reduce residual moisture, you can stop the water supply and continue moving the nozzle towards you, removing excess moisture.

copy link to clipboard

Maintaining AquaBOX after finishing wet cleaning mode is easy.

  • Pour out dirty water, wash all parts of the AquaBOX and be sure to dry them.

Only after this clean and dry AquaBOX can be assembled and stored.

copy link to clipboard

The aqua spray injector is fixed in the AquaBOX lid with rubber seals.

To remove the injector, simply pull it towards you, slightly rotating it in different directions.

Washing the aqua sprayer is a very important procedure, because it is responsible for the correct operation of the aquafilter system.

copy link to clipboard

To install the hard surface adapter:

  • First slide it onto the fixed clip on one side of the washing nozzle.;
  • Then secure the adapter to the other side of the nozzle using the red locking button;
  • Then fix the adapter in the working position with the central lock..
copy link to clipboard

To detach the solution supply hose from the vacuum cleaner, simply press the locking button and the tube will pop out.

Never pull or force the solution supply tube towards you!

copy link to clipboard

Special holes in the body of the vacuum cleaner make it easy to keep extra nozzles handy while cleaning.

For example, you can place a crevice nozzle, a brush or an upholstery nozzle in these holes while cleaning.

This way you always have small accessories at hand.

Some models of THOMAS vacuum cleaners are also equipped with a Vario Clip nozzle holder, which is attached to the tube or hose handle.

copy link to clipboard
"

It is strictly prohibited to pour hot water into the clean water tank!

This may damage the cleaning solution supply system.

If necessary, you can fill the tank with slightly warm water, not exceeding 25-30 degrees.

"
copy link to clipboard

It is not recommended to add aromatic (essential) oils to the water during dry or wet cleaning!

Fats promote the adhesion of debris and dust particles to the parts and filters of the vacuum cleaner. This makes it difficult to maintain the vacuum cleaner after cleaning and shortens the service life of replaceable filters.

copy link to clipboard

It is recommended to wash and dry the water-repellent filters in the AquaBOX lid after each cleaning.

If the suction power has decreased, it's time to wash the HEPA filter.

  1. First, tap the dry filter on a hard surface;
  2. Then gently rinse the entire surface of the filter under running water WITHOUT using brushes or detergents.
  3. Even if the filter has turned grey, it can still trap dust perfectly. After washing, dry the filter at room temperature.

The motor protection filter with activated carbon cannot be washed, it can only be tapped out lightly.

The micro exhaust filter in the lower rear part of the vacuum cleaner is not serviceable and must be replaced.

For maximum efficiency of the entire filtration system, the manufacturer recommends changing all the filters together (the whole set) вon average once every 12 months, but this depends on how the cleaner is used (frequency of cleaning, contamination level in the room, etc.).

copy link to clipboard

The process of washing a carpet occurs when water is supplied to the washing nozzle while the nozzle is moved along the surface.

The washing solution, under pressure, penetrates deep into the pile of the carpet, washing away all the dirt from the depths.

Wet and more elastic fibres of the carpet are straightened by the suction force and the surface becomes evenly fluffy. At the same time, residual moisture will be present on the surface and in the depths of the carpet.

To remove the water, change the angle of the nozzle, press it down on the carpet with a little force and collect the water in a ""pulling"" motion. For maximum effect, do this several times until no more water drops appear on the nozzle.

The transparent plastic of the nozzle makes it possible to control how the water is absorbed.

The amount of water sprayed onto the carpet by a vacuum cleaner and collected in the AquaBOX may vary by 2 or more times.

This is normal - some moisture remains in the carpet and dries out in a few hours.

copy link to clipboard

In order to quickly vacuum up spilled liquid with an AquaBOX vacuum cleaner, be sure to install a splash quarding insert in the AquaBOX!

  • Connect the air hose and telescopic tube to the vacuum cleaner;
  • Attach a carpet/floor switchable nozzle or a wide cleaning nozzle to the tube (with a hard surface adapter if you need to collect water from a smooth floor);
  • Turn on the vacuum cleaner and start collecting water by moving the nozzle towards you;
  • The vacuum cleaner can collect up to 2.6 liters of liquid at a time;
  • When the tank is full, the vacuum cleaner will automatically turn off.

If you need to continue working, pour out the collected water and turn the vacuum cleaner on again.

copy link to clipboard