Ukraine

PARKETT MASTER XT

Art. 788570
Original German-made wet and dry vacuum cleaner with AquaBOX water filtration system. Dry and wet cleaning of parquet and laminate, carpets. Indoor air purification. Prompt liquid collection.
It's easy to quickly pick up spills in your apartment with THOMAS vacuum cleaner for wet cleaning or dry cleaning and water suction. The vacuum cleaner collects between 2.6 and 20 liters of water in one go (depending on the model). Practical and handy in domestic and emergency situations.
Clean your carpet quickly and easily with a powerful vacuum cleaner. THOMAS vacuum cleaners with the modern AquaBOX, Aquafilter or DryBOX filtration systems do not lose suction power throughout the entire cleaning process. Cleaning your carpet with THOMAS is quick and efficient.
THOMAS vacuum cleaner with a special nozzle can help you remove stains from your parquet floor. For example, the AquaStealth nozzle gently removes dirt and stains from parquet and laminate without direct contact with water. For best results, use THOMAS ProFloor cleaning concentrate.
In order to clean the parquet without scratches, use brushes made from natural materials. THOMAS vacuum cleaners for parquet and laminate include a dry cleaning nozzle with a brush made of natural horsehair. It carefully collects dust and debris without scratching the floor surface.
Properly washing parquet and laminate flooring means not wetting it too much and applying and collecting moisture evenly. For this purpose, the AquaStealth parquet and laminate cleaning nozzzlehas been developed, which, when moving forward, dry cleans and applies the cleaning solution, and when moving backward, dries the surface completely.
THOMAS vacuum cleaners with Aquafilter or AquaBOX water filtration system and Wet-Jet dust suppression technology help improve air quality. They purify the air in the room during cleaning and can work in air purifier mode. To do this, turn on the vacuum cleaner for 5-10 minutes without hose connection.
A multifunctional vacuum cleaner will help you quickly clean up the house. Dry and wet cleaning, air purification, removing stains from carpets and furniture - all these tasks can be easily solved by THOMAS washing vacuum cleaner with AquaBOX or Aquafilter. All functions in one device - efficient and practical!
Assistant for manual with video
Assistant for manual with video

Preparing the water filter THOMAS AquaBOX:

  • It is necessary to pour 1 liter of clean water into a container;
  • Insert the AquaBOX into the vacuum cleaner housing;
  • Make sure that the injector is working and that water is spraying through the cover opening

The anti-spill insert must never be installed when preparing the AquaBOX for dry cleaning.

copy link to clipboard

You can rinse the cleaning solution supply system after wet cleaning using the spray mode.

  • Fill the solution tank with clean water;
  • Switch on the pump (Pump button) and press the handle of the shut-off valve on the hose;
  • Place the washing nozzle in a suitable container and allow the pump to pump water from the clean water tank into the container.
copy link to clipboard

In order to connect the washing nozzle and assemble the water supply system, you must:

  1. Mount the washing nozzle on the telescopic tube, using clips to secure the solution supply hose to the tube;
  2. Connect a shut-off valve to the air hose;
  3. Fasten the cleaning solution supply hose from the shut-off valve to the vacuum cleaner to the air hose with clips. The gaps between the clips should be approximately equal;
  4. Insert the thin end of the air hose into the telescopic tube, making sure the connection is secure;
  5. Connect the tube of the washing nozzle to the shut-off valve, turning until it locks into place;
  6. Insert the air hose of the vacuum cleaner and turn until it locks into place;
  7. Insert and fix the tip the tip of the detergent supply hose in the connector on the cleaner body.
copy link to clipboard

To prepare a vacuum cleaner with AquaBOX for use in wet cleaning mode, you must:

  1. Pour water or water with THOMAS cleaning concentrate into the detergent tank.;
  2. Place an splash guarding insert in the AquaBOX;
  3. Attach the cleaning solution supply tube on the air hose to the connection on the vacuum cleaner body;
  4. Connect the detergent supply tube of the washing nozzle to the shut-off valve;
  5. Turn on the vacuum cleaner with the Power button and the pump with the Pump button;
  6. Press the shut-off valve lever.

You are ready for wet cleaning!

copy link to clipboard

In order to wash upholstered furniture using a narrow nozzle for wet cleaning.

  • Attach it to the air hose;
  • Then attach the detergent supply tube to the shut-off valve on the air hose and turn until it is fully secured;
  • Switch on the pump using the button on the vacuum cleaner body, then press the shut-off valve lever to supply water.

Direct wet cleaning occurs when the washing nozzle moves towards itself. Work strip by strip, lifting and repositioning the nozzle.

To reduce residual moisture, you can stop the water supply and continue moving the nozzle towards you, removing excess moisture.

copy link to clipboard

Maintaining AquaBOX after finishing wet cleaning mode is easy.

  • Pour out dirty water, wash all parts of the AquaBOX and be sure to dry them.

Only after this clean and dry AquaBOX can be assembled and stored.

copy link to clipboard

To pull out the power cord before starting work, pull the plug and then pull the cord.

Be sure to look at the indicator (red electrical tape on the cord). As soon as it is visible, stop pulling the cable.

To rewind the cable, lightly pull it then release it (the vacuum cleaner uses inertial rewinding of the power cable).

copy link to clipboard

The aqua spray injector is fixed in the AquaBOX lid with rubber seals.

To remove the injector, simply pull it towards you, slightly rotating it in different directions.

Washing the aqua sprayer is a very important procedure, because it is responsible for the correct operation of the aquafilter system.

copy link to clipboard

To detach the solution supply hose from the vacuum cleaner, simply press the locking button and the tube will pop out.

Never pull or force the solution supply tube towards you!

copy link to clipboard

For the ideal gentle and thorough dry cleaning of parquet and laminate floors, there are special nozzles with natural bristles.

These nozzles leave no scratches or other damage on delicate floor coverings.

The nozzle with natural horsehair and felt inserts also rubs and polishes the floor, giving parquet or laminate an additional light shine.

copy link to clipboard

Special holes in the body of the vacuum cleaner make it easy to keep extra nozzles handy while cleaning.

For example, you can place a crevice nozzle, a brush or an upholstery nozzle in these holes while cleaning.

This way you always have small accessories at hand.

Some models of THOMAS vacuum cleaners are also equipped with a Vario Clip nozzle holder, which is attached to the tube or hose handle.

copy link to clipboard
"

It is strictly prohibited to pour hot water into the clean water tank!

This may damage the cleaning solution supply system.

If necessary, you can fill the tank with slightly warm water, not exceeding 25-30 degrees.

"
copy link to clipboard

It is not recommended to add aromatic (essential) oils to the water during dry or wet cleaning!

Fats promote the adhesion of debris and dust particles to the parts and filters of the vacuum cleaner. This makes it difficult to maintain the vacuum cleaner after cleaning and shortens the service life of replaceable filters.

copy link to clipboard

It is recommended to wash and dry the water-repellent filters in the AquaBOX lid after each cleaning.

If the suction power has decreased, it's time to wash the HEPA filter.

  1. First, tap the dry filter on a hard surface;
  2. Then gently rinse the entire surface of the filter under running water WITHOUT using brushes or detergents.
  3. Even if the filter has turned grey, it can still trap dust perfectly. After washing, dry the filter at room temperature.

The motor protection filter with activated carbon cannot be washed, it can only be tapped out lightly.

The micro exhaust filter in the lower rear part of the vacuum cleaner is not serviceable and must be replaced.

For maximum efficiency of the entire filtration system, the manufacturer recommends changing all the filters together (the whole set) вon average once every 12 months, but this depends on how the cleaner is used (frequency of cleaning, contamination level in the room, etc.).

copy link to clipboard

The process of washing a carpet occurs when water is supplied to the washing nozzle while the nozzle is moved along the surface.

The washing solution, under pressure, penetrates deep into the pile of the carpet, washing away all the dirt from the depths.

Wet and more elastic fibres of the carpet are straightened by the suction force and the surface becomes evenly fluffy. At the same time, residual moisture will be present on the surface and in the depths of the carpet.

To remove the water, change the angle of the nozzle, press it down on the carpet with a little force and collect the water in a ""pulling"" motion. For maximum effect, do this several times until no more water drops appear on the nozzle.

The transparent plastic of the nozzle makes it possible to control how the water is absorbed.

The amount of water sprayed onto the carpet by a vacuum cleaner and collected in the AquaBOX may vary by 2 or more times.

This is normal - some moisture remains in the carpet and dries out in a few hours.

copy link to clipboard

To wash parquet/laminate flooring with the AquaStealth nozzle, press the detergent solution supply lever and at the same time move the nozzle away from you over the surface.

This will wet the surface and dissolve the dirt. Release the lever for cleaning solution supply and move it towards you - the nozzle will collect the liquid with dissolved dirt.

The residual moisture of the floor covering after wet cleaning is less than 1%.

The AquaStealth nozzle not only cleans, but also dries the floor.

When wet cleaning with the AquaStealth nozzle, the vacuum cleaner constantly supplies clean water and sucks dirty water into a separate tank.

After washing, the floor is perfectly clean, without streaks (unlike the floor after washing with a rag or mop). A napkin attached to the nozzle gently rubs the floor, giving it a slight shine and a well-groomed appearance.

copy link to clipboard

In order to quickly vacuum up spilled liquid with an AquaBOX vacuum cleaner, be sure to install a splash quarding insert in the AquaBOX!

  • Connect the air hose and telescopic tube to the vacuum cleaner;
  • Attach a carpet/floor switchable nozzle or a wide cleaning nozzle to the tube (with a hard surface adapter if you need to collect water from a smooth floor);
  • Turn on the vacuum cleaner and start collecting water by moving the nozzle towards you;
  • The vacuum cleaner can collect up to 2.6 liters of liquid at a time;
  • When the tank is full, the vacuum cleaner will automatically turn off.

If you need to continue working, pour out the collected water and turn the vacuum cleaner on again.

copy link to clipboard

If wet cleaning is carried out correctly, residual moisture is minimal. You can walk on the floor or carpet and sit on the sofa immediately after cleaning.

In order to avoid excessive wetting of the surface, make several strokes with the nozzle with spraying water or cleaning solution, and then several strokes without spraying, just collecting water and drying the surface.

copy link to clipboard

The main difference between a parquet nozzle and a regular one is that through it water is not supplied directly to the floor surface, but to a special cloth, which then washes the floor.

A regular wet floor nozzle sprays water under pressure directly onto the floor. This method is great for tiles, linoleum, stone and other coverings that are not afraid of water.

Parquet nozzles, such as AquaStealth or the nozzle with cloth adapter, allow you to clean delicate floors just as thoroughly, but with a minimum amount of moisture. This ensures that the floor will not swell or bloat after wet cleaning.

copy link to clipboard