Home
Information
Where to buy
Service
Contact us
Language
Ua
Ru
En

SUPER 30 S

Art. 788079

Vacuum cleaner for wet and dry cleaning of big area surfaces

A vacuum cleaner can help you wash your carpet at home. The THOMAS vacuum cleaner rinses carpets down to the base of the pile by pumping pressurized water through a wide cleaning nozzle with a sharp edge. For best results, use a branded cleaning concentrate. Vacuum without water to dry the carpet.
You can clean the floor quickly and effortlessly with a standart or wireless washing vacuum cleaner. THOMAS vacuum cleaner constantly supplies clean water for washing, and sucks dirty water into a separate container. Washing nozzle with brush adapter perfectly copes with dirt and stains. For best results, use ProFloor cleaning concentrate.
To make cleaning a large area easier, you can use THOMAS multi-functional vacuum cleaner with a large dust container and a large detergent tank. THOMAS vacuum cleaners for large areas have wet cleaning tanks with a volume of 3.6 to 10 litres.
Cleaning in a large house, workshop, garage, country house is a task for the THOMAS multi-cleaner. Multifunctional vacuum cleaners with large stainless steel or shock-proof plastic bodies and special nozzles will help you pick up coarse debris, chips, wet dirt, water, leaves, etc.
THOMAS washing vacuum cleaner will help you quickly and easily clean hard floors. Water is supplied under pressure to a nozzle with a brush adapter. The vacuum cleaner removes dirt and stains well. Only clean water is used for washing, and dirty water is collected into a separate container. After cleaning, the floor is clean and practically dry.
Assistant for manual with video
Assistant for manual with video

In order to wash upholstered furniture using a narrow nozzle for wet cleaning.

  • Attach it to the air hose;
  • Then attach the detergent supply tube to the shut-off valve on the air hose and turn until it is fully secured;
  • Switch on the pump using the button on the vacuum cleaner body, then press the shut-off valve lever to supply water.

Direct wet cleaning occurs when the washing nozzle moves towards itself. Work strip by strip, lifting and repositioning the nozzle.

To reduce residual moisture, you can stop the water supply and continue moving the nozzle towards you, removing excess moisture.

copy link to clipboard

The process of washing a carpet occurs when water is supplied to the washing nozzle while the nozzle is moved along the surface.

The washing solution, under pressure, penetrates deep into the pile of the carpet, washing away all the dirt from the depths.

Wet and more elastic fibres of the carpet are straightened by the suction force and the surface becomes evenly fluffy. At the same time, residual moisture will be present on the surface and in the depths of the carpet.

To remove the water, change the angle of the nozzle, press it down on the carpet with a little force and collect the water in a ""pulling"" motion. For maximum effect, do this several times until no more water drops appear on the nozzle.

The transparent plastic of the nozzle makes it possible to control how the water is absorbed.

The amount of water sprayed onto the carpet by a vacuum cleaner and collected in the AquaBOX may vary by 2 or more times.

This is normal - some moisture remains in the carpet and dries out in a few hours.

copy link to clipboard
"

It is strictly prohibited to pour hot water into the clean water tank!

This may damage the cleaning solution supply system.

If necessary, you can fill the tank with slightly warm water, not exceeding 25-30 degrees.

"
copy link to clipboard

It is not recommended to add aromatic (essential) oils to the water during dry or wet cleaning!

Fats promote the adhesion of debris and dust particles to the parts and filters of the vacuum cleaner. This makes it difficult to maintain the vacuum cleaner after cleaning and shortens the service life of replaceable filters.

copy link to clipboard

If wet cleaning is carried out correctly, residual moisture is minimal. You can walk on the floor or carpet and sit on the sofa immediately after cleaning.

In order to avoid excessive wetting of the surface, make several strokes with the nozzle with spraying water or cleaning solution, and then several strokes without spraying, just collecting water and drying the surface.

copy link to clipboard