Perfect cleanliness of carpets with THOMAS
Regular wet cleaning of the carpet will eliminate the need to order periodically its dry cleaning.
It will also preserve the hygiene of the surrounding environment, because the washing vacuum cleaner for
carpets removes dust, microorganisms and dirt from the depth of the pile, humidifies the air.
Devices from the German manufacturer Thomas are rightfully recognized as one of the reliable assistants for cleaning.
Cleaning with THOMAS is an effective process that will not take much time, and after it the carpet will be like a new one.
How to clean a carpet with a vacuum cleaner properly?
The principle of operation of devices with the function of wet cleaning is simple. With the help of a
special nozzle, a solution with a detergent is sprayed onto the pile, and then it is sucked up with a
vacuum cleaner along with liquid and dirt.
Water is in contact with a carpet for a short time, but during this time it manages to dissolve the dirt.
- For greater efficiency, before cleaning carpets with a vacuum cleaner,
you need to dry clean all surfaces - the floor, electronics, shelves and the carpet itself, in order to:
- remove large debris, wool and hair from the carpet;
- prevent dust from settling on an already clean and slightly damp surface (this is exactly what will happen if all remaining surfaces are cleaned after wet cleaning).
Next, you can start cleaning carpets with a THOMAS vacuum cleaner:
- Pour water into the tank, add the recommended amount of detergent to it. The resulting solution will accelerate the dissolution of complex and old stains.
- Install a special water spray nozzle on the suction pipe.
- Place a splash guard in the AquaBox. It has a built-in special sensor that will turn off the device if a lot of water is collected. In this way, the motor is protected.
- Turn on both buttons (power and pump) on the vacuum cleaner to start cleaning the carpet or rug.
- Guide the nozzle towards you. At the same time, constantly hold down the lever that is responsible for spraying the washing solution.
- Walk over the entire floor covering, processing it strip by strip. In order for washing to be more effective, it is worth making strips overlap.
- Pour out the dirty water from the vacuum cleaner tank after cleaning the carpet.
Are all nozzles suitable for washing carpets?
- Each washing device comes with a special nozzle. Its differences from other types:
- Triangular shape.
- Narrow nozzle, thanks to which high power is provided.
- Hose for supplying the solution.
What else do you need to remember?
- When cleaning carpets with a vacuum cleaner, you should use a special professional detergent solution - THOMAS. This concentrated shampoo makes cleaning even more effective, because it copes with even difficult old stains. Its advantages are economical consumption and excellent result.
- Cleaning should be done at a moderate pace to treat each area of the carpet thoroughly.
- To prevent the carpet from getting wet, do not clean the same area for a long time.
- Before buying a vacuum cleaner, check your carpet for stain resistance. To do this, wet a white cloth and rub the pile in some inconspicuous place. If the fabric is not stained, then the carpet can be washed with a vacuum cleaner.
